Sunday May 19

How to stick'em...

Below we've put together a step-by-step photo tutorial of how to install our wall graphics.  Remember to always wipe down your wall with a damp cloth to prep your wall or class. Make sure it is dry before continuing the installation process.  If your graphic was shipped to you, unrolled it and lay it on a flat surface for an hour to allow it to acclimate to your home or office. Click on one of the small images below to a specific step in more detail. NOTE: There is also a video at the very bottom of this page to help you.

1. Materials

2. Measure and mark

3. Measure and mark

4. Tape graphic up

5. Graphic ready

6. Remove backer

7. Remove backer

8. Remove backer

9. Remove backer

10. Ready for burnishing

11. Press firmly

12. Rub with card

13. downward direction

14. Removal of tactape

15. FINISHED!

Due to the removable nature of the adhesive, you may find that a few letters need a little extra push to get them to stick to the wall. Use your thumb and gently press and rub the graphic until it is adhered flush against the wall.

Below is a video clip showing the application of a quote and how to properly peel off the tactape (step 14).